N1922A Agilent N1922A P系列宽带功率传感器,50 MHz至40 GHz Agilent N1922A P系列宽带功率传感器可提供峰值、峰均比、平均功率、上升时间、下降时间、大功率值、小功率值以及宽带信号的统计数据。 主要特性与技术指标 ·当连接到被测件时进行调零和校准 ·-35 dBm至+20 dBm的宽动态范围,适用于峰值功率测量 ·校准因数、线性、温度及带宽修正数据均存储在EEPROM(电子擦除式可编程只读存储器)上 ·标配的2.4mm连接器 ·固定在传感器上的电缆电缆长度为1.5m(5ft)、3m(10ft)和10m(31ft) Agilent N1922A Agilent/HP N1922A P-Series Wideband Power Sensor, 50 MHz to 40 GHz The N192XA sensors are the first to provide internal zero and calibration by integrating a DC reference source and switching circuits into the power sensor. This feature eliminates the multiple connections associated with using an external calibration source, thus minimizing connector wear, test-time and measurement uncertainty. Features: · Zero and calibrate while connected to the DUT · -35 dBm to +20 dBm wide dynamic range for peak power measurements · Calibration factors, linearity, temperature and bandwidth correction data stored in EEPROM · Precision 2.4mm connector as standard · Sensor cable fixed to sensor. Available cable lengths are 1.5m (5ft), 3m (10ft) and 10m (31ft)